What is PTFE anti adhesive coating sprayed on the material bucket

Source：www.caizimi.com Release date： 2025年07月28日

Information summary：The PTFE anti sticking coating sprayed on the material bucket refers to a thin film coating formed by spraying polytetrafluoroethylene (PTFE) material on the inner or outer wall surface of the material bucket (usually made of metal materials such as stainless steel, aluminum alloy, etc.) through a specific process. Its core function is to utilize the ultra-low surface energy characteristics of PTF

The PTFE anti sticking coating sprayed on the material bucket refers to a thin film coating formed by spraying polytetrafluoroethylene (PTFE) material on the inner or outer wall surface of the material bucket (usually made of metal materials such as stainless steel, aluminum alloy, etc.) through a specific process. Its core function is to utilize the ultra-low surface energy characteristics of PTFE to achieve the "anti sticking" effect, while also possessing advantages such as high and low temperature resistance, corrosion resistance, and non adhesiveness.
1、 Core characteristics of PTFE anti sticking coating
PTFE (commonly known as "Teflon") is a fluorinated polymer material with high carbon fluorine (C-F) bond energy and weak intermolecular forces in its molecular structure. Therefore, the coating formed has the following key characteristics:
Good non adhesiveness: The surface energy is relatively low (about 18mN/m), and almost all solid materials (such as powders, liquids, and viscous substances) are difficult to adhere to, making it difficult for materials to remain in the material bucket.
High and low temperature resistance: It can be used for a long time in the temperature range of -200 ℃ to 260 ℃, without decomposition or aging at high temperatures, suitable for scenarios where material barrels come into contact with high-temperature materials.
Chemical inertness: Resistant to corrosive substances such as strong acids, strong bases, and organic solvents, does not undergo chemical reactions with most materials, and ensures material purity.
Smooth surface: After the coating is cured, the surface is flat and smooth, with a low friction coefficient (only about 0.04). The material has low flow resistance in the bucket and is easy to empty.
2、 The function of PTFE anti sticking coating sprayed on the material bucket
1. Prevent material adhesion and reduce residue
For viscous materials (such as coatings, adhesives, food slurries), powdered materials (such as plastic powder, chemical powders), or easily agglomerated materials (such as certain pharmaceutical intermediates), after spraying PTFE coating, the inner wall surface of the material bucket is smooth and non sticky, and the material is not easy to adhere, which can reduce residual amount (usually by more than 90%), improve material utilization rate, and reduce cleaning difficulty.
2. Reduce material flow resistance and improve conveying efficiency
Smooth PTFE coating can reduce the frictional resistance of materials during mixing, pouring, or transportation in the material bucket, especially for high viscosity materials such as resins and pastes, which can be discharged more smoothly, avoiding blockage or poor transportation caused by adhesion, and improving production efficiency.
3. Protect the material bucket and extend its service life
If the material is corrosive (such as acidic or alkaline solutions, chemical reagents), PTFE coating can be used as an isolation layer to prevent the metal substrate of the material bucket from being corroded and to prevent the material from being contaminated due to contact with metal (such as the high purity requirements for materials in the food and pharmaceutical industries).
4. Simplify the cleaning process
Due to the non adhesive nature of the materials, the material bucket does not require strong scrubbing after use, and can be cleaned simply by rinsing, reducing cleaning time and labor costs. It is particularly suitable for production scenarios that require frequent material replacement (such as multi variety and small batch production).
3、 Examples of applicable scenarios
1. Food processing industry: A bucket for storing viscous food ingredients such as syrup, chocolate sauce, jam, etc. After spraying PTFE, it can avoid residual and contaminated raw materials and meet food contact material safety standards (such as FDA certification).
2. Chemical industry: storage or transportation of viscous chemical materials such as adhesives, coatings, resins, inks, etc. The anti stick coating can reduce material waste and resist chemical corrosion.
3. Pharmaceutical industry: used to hold buckets for ointments, medicinal pastes, traditional Chinese medicine extracts, etc. The chemical inertness of PTFE ensures the purity of drugs, and its non stick properties facilitate the complete discharge of materials, avoiding cross contamination.
4. Plastic/Rubber Industry: A material bucket for mixing or temporarily storing plastic melt adhesive and rubber slurry. The coating can prevent high-temperature melt adhesion and withstand the high temperature of the melt (PTFE can withstand temperatures up to 260 ℃, meeting most plastic processing temperature requirements).

Previous What is the hardness of tungsten carbide sprayed …

Next Where is PTFE mainly used for spraying on diaphra…